Draft Detailed Project Report

Recommendations

Info

Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak DPR objective and approach Objective Technology Centre in Rohtak has been proposed with the underlying fact and review of the catchment area which has some of the leading units in Automobile, General Engineering, Leather goods and footwear. Further a number of transformational infrastructure projects such as Kundli-Manesar- Palwal (KMP) Expressway, Regional Rapid Transit Service and various industrial projects are proposed and the TC can facilitate and support the MSME units coming up across this region. The TC at Rohtak will play an important role in enhancing the competitiveness of the MSME Units in the area. TC will focus on providing skill up-gradation, improving access to technology, and offering advocacy support to the MSMEs with high growth potential. The long term vision is to ensure competitiveness of the MSMEs in the eco-system by strengthening their linkages to the mainstream manufacturing sector in the region. The objective of this DPR is to evaluate feasibility of proposed MoMSME TC at Rohtak. This includes assessment of the market need in the region, technology and skillset requirement, amount of investment required, construction needed, its layout and subsequent requirements for implementation of the green field TC at Rohtak. This DPR has been prepared in consultation with relevant stakeholders including O/o DC-MSME, Government of Haryana, World Bank, OEMs, Tier I & II suppliers, industry association, Government Institutes and some ancillary units in the region. This DPR would facilitate the implementation plan of proposed TC at Rohtak. Approach To start with, a comprehensive secondary research was carried out to understand the tooling and technological requirements of the General Engineering Sector and in particular of the Rohtak region. To validate the facts, the team conducted a detailed primary research that included meetings with various key stakeholders including O/o DC-MSME, Industrial Associations and General Engineering units in the catchment and others as explained below. Discussions with various stakeholders were carried out to develop better understanding of the requirements and expectations from the proposed TC. Leading players were met in this region to discuss and understand the various insights with respect to the tooling & other technological requirements during the preparation of the DPR. Telephonic discussions with some of the General Engineering component manufacturers and suppliers across various regions (such as Hyderabad, Bengaluru, Chennai, Aurangabad and Ahmedabad) were carried out. The objective of this primary research was to understand their business requirements, issues, challenges, and future requirements to develop a deeper understanding of the requirements that can be served by the TCSP in future. Based on the outcomes and the results of the discussions, market opportunity assessment was undertaken to understand the tooling & technology demand in General engineering sector across various stages of manufacturing. Page 33 of 251
Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak Way forward: Post completion of the DPR for the proposed TC at Rohtak under TCSP, the on-boarding of 3 main partners would be very much required to achieve the envisaged outcome in the defined time frame. ► Construction Management Consultant - For the development of the new facility ► Technology Partner – Procurement of machines and adoption of new technologies ► Cluster Network Manager – Marketing the centre an development of cluster with the right mix of products and services Page 34 of 251
Page 1 and 2: Draft Detailed Project Report New T
Page 3 and 4: Technology Centre Systems Program -
Page 15 and 16: Key Components Technology Centre Sy
Page 33: Technology Centre Systems Program -
Page 45 and 46: Population (in Lacs) Technology Cen
Page 85 and 86:
Technology Centre Systems Program -
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251:
show all

Draft Detailed Project Report

Create successful ePaper yourself

Delete template?

Save as template?