Draft Detailed Project Report

Recommendations

Info

Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak Occupational health and safety The TC is proposed to implement all reasonable precautions to protect the health and safety of employees and students as per the World Bank norms. Although the focus will be placed during the operation of TC, much of the occupational health and safety guidance will also be followed during the construction and decommissioning activities. Preventive and protective measures will be introduced according to the following order of priority: ► Eliminating the hazard by removing the activity from the work process e.g. substitution with less hazardous chemicals, using different manufacturing processes, etc. ► Controlling the hazard at its source through use of engineering controls e.g. local exhaust ventilation, isolation rooms, machine guarding, acoustic insulating, etc. ► Minimizing the hazard through design of safe work systems and administrative or institutional control measures e.g. job rotation, training safe work procedures, lock-out and tag-out, workplace monitoring, limiting exposure or work duration, etc. ► Providing appropriate personal protective equipment (PPE) in conjunction with training, use, and maintenance of the PPE. The application of prevention and control measures to occupational hazards will be done based on comprehensive job safety or job hazard analyses. The results of these analyses should be prioritized as part of an action plan based on the likelihood and severity of the consequence of exposure to the identified hazards. The general EHS guidelines: occupational health and safety will be followed with respect to the following; ► General facility design and operation Integrity of workplace structures Severe weather and facility shutdown Workspace and exit Fire precautions Lavatories and showers Potable water supply Clean eating area Lighting Safe access First aid Air supply Work environment temperature ► Communication and training OHS Training Page 197 of 251
Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak Visitor Orientation New Task Employee and Contractor Training Labelling of Equipment Area Signage Communicate Hazard Codes ► Physical Hazards Rotating and Moving Equipment Noise Vibration Electrical Eye Hazards Welding / Hot Work Industrial Vehicle Driving and Site Traffic Working Environment Temperature Ergonomics, Repetitive Motion, Manual Handling Working at Heights ► Chemical Hazards Air quality Fire and explosions Corrosive, oxidizing, and reactive chemicals Asbestos Containing Materials (ACM) ► Biological and radiological hazards: Biological agents represent potential for illness or injury due to single acute exposure or chronic repetitive exposure. Radiation exposure can lead to potential discomfort, injury or serious illness to workers. Appropriate strategies as per the guideline will be taken for Prevention and control of such hazards. ► Personal protective equipment (PPE) to provide additional protection to workers exposed to workplace hazards in conjunction with other facility controls and safety systems. Monitoring Occupational health and safety monitoring programs would be undertaken to verify the effectiveness of prevention and control strategies. The selected indicators should be representative of the most significant occupational, health, and safety hazards, and the implementation of prevention and control strategies. The monitoring program would include; ► Safety inspection, testing and calibration ► Surveillance of the working environment Page 198 of 251
Page 1 and 2:
Draft Detailed Project Report New T
Page 3 and 4:
Technology Centre Systems Program -
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Key Components Technology Centre Sy
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Population (in Lacs) Technology Cen
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148: Technology Centre Systems Program -
Page 197: Technology Centre Systems Program -
Page 249 and 250:
Page 251:
show all

Draft Detailed Project Report

Create successful ePaper yourself

Delete template?

Save as template?