Draft Detailed Project Report

Recommendations

Info

Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak ► Prior experience: These are the sectors where O/o DC-MSME has experience of operating TCs, such as General Engineering, Automotive, Electronics/ESDM, Leather & Footwear, Glassware, Sports Goods, and Fragrance & Flavours ► Concentration of MSME’s: These are sectors where O/o DC-MSME has limited prior experience of operating TCs, however there exist a large number of MSMEs in these industries. Such as Food processing, Textiles (including Handlooms & Handicrafts), Pharmaceuticals, Wood/Paper/Pulp, and Rubber & Plastics. ► Emerging Sectors: These are upcoming sectors that may be at the forming stage, but will become major sectors in the near future, such as Bio-technology, Nano -technology, etc. The sector in which DC-MSME has prior experience has been taken on priority. These sectors are: auto components, ESDM, general engineering, fragrance & flavour, leather & footwear, glass. Later the scope can be expanded to include other sectors pertaining to ministries other than MoMSME, if needed. Such sectors include food processing, pharmaceutical, packaging etc. where presence of MSMEs is considerable. The list of locations arrived by the above was further refined and finalised with respect to the following additional considerations; During these discussions additional considerations emerged: ► State Classification: The states were classified into two categories as unserved states and served states. All states of the country were distributed between Un-served states where O/o DC-MSME did not have an operating TC and served states where an operating MoMSME TC existed. ► At first unserved states were considered for the new TC in order to spread the coverage of MoMSME TC which would help in supporting more MSMEs across the country. With the approval of locations for the unserved states, served states would also be considered for the technologies for which existing TC cannot support. ► On the basis of MSMEs concentration in prior experience sectors, leading clusters were identified in each unserved state. This resulted in identifying the industry wise potential locations in each of these states. ► Some of the unserved states took proactive approach and have allocated or identified land for the purpose of TC. These locations were mapped to the locations identified in the step above. Accordingly technology focus was selected for these locations. Technology Centre Systems Program – DPR for New TC at Rohtak 39
Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak Selection of Rohtak location for setting up of new TC As per the location selection framework and subsequent approval in the 4 th PSC meeting held on 15 th May 14, Rohtak was selected as the location for setting up of new General Engineering TC focus. Rohtak region has been found suitable from multiple perspectives: ► Rohtak is a part of the National Capital Region (NCR) which provides various immediate benefits for the district. ► Rohtak has very good connectivity with other key districts in Haryana and other states. There are 3 National Highways including NH10 which connects it to Delhi. The nearest airport is Indira Gandhi International Airport in New Delhi. ► MSME units present in Rohtak region operates in sectors such as automobiles, general engineering (fasteners, machined components, hinges, pipes and steel furniture etc.), repairing and services leather and wooden furniture etc. ► Industrial projects proposals entailing investment of INR 3,000 crore are planned for Rohtak. These include projects from Suzuki and Amul. Footwear park in Bahadurgarh will be supported by the TC as there are large shoe manufacturing units operate from the park. ► There are various clusters around Rohtak such as footwear and plastic cluster in Jhajjar, Auto ancillary clusters in Gurgaon & Faridabad, scientific instrument cluster in Ambala, Foundry cluster in Panipat and Agriculture implements in Karnal etc. which can be supported by the TC. Technology Centre Systems Program – DPR for New TC at Rohtak 40
Page 1 and 2: Draft Detailed Project Report New T
Page 3 and 4: Technology Centre Systems Program -
Page 15 and 16: Key Components Technology Centre Sy
Page 39: Technology Centre Systems Program -
Page 45 and 46: Population (in Lacs) Technology Cen
Page 91 and 92:
Technology Centre Systems Program -
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251:
show all

Draft Detailed Project Report

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?