Draft Detailed Project Report

Recommendations

Info

Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak ► The septic tanks will have adequate manholes for cleaning and maintenance purpose and will also have gas vents rising above the highest level of the buildings to avoid foul smell. ► Overflow outlets of the septic tanks will be connected to secondary treatment achieved through properly designed constructed wet land system with sub-surface flow. ► The constructed wetland will consist of locally available species of wetland trees, bushes and shrubs. ► Collection tank of adequate capacity will be provided on the upstream of the constructed wetland to take care of incidental heavy flows. ► The constructed wetland will be located suitably in the premises allowing adequate sunlight for growth of plants throughout the day. ► Provision will be made to allow rejection and regeneration discharge from water treatment plant by dissolving high TDS water suitably. ► Necessary de-odouring and chemical dosing will be provided at the end of wetland before the water obtained is reused. ► All equipment used and the design, arrangement will be in compliance with applicable rules and regulations as laid down by town planning authority, central pollution control board and other local authorities. Ventilation system a) Internal buildings ► The TC premises will have provision for sufficient ventilation. This will be done keeping in view the amount of space in the TC, number of people expected to occupy the space, type and amount of machines/equipment, and overall size of the space. The designing will be done keeping in view proper distribution of air for ventilation throughout all occupied spaces across the TC. ► Natural ventilation - The premises will have adequate openings, such as doors, windows and/or vent opening to clean environment. Roof vents would be placed wherever applicable to reduce the reliance on air conditioning systems and also reduce CO2 emission in the building. ► Mechanical ventilation – Mechanical parts would be installed to provide air to building occupants at a comfortable temperature and humidity that would be free of harmful concentrations of air pollutants. ► Provision for adequate supply of outdoor air in the indoor environment will be provided to dilute pollutants released by equipment, building materials, furnishings, products, and people. The building’s ventilation system will be properly installed with filters to trap such particles. ► Air input, smoke exhaust will also be installed and maintained for proper ventilation. Page 211 of 251
Technology Centre Systems Program – <strong>Draft</strong> DPR for New TC at Rohtak ► Hybrid ventilation systems are popular in industrial buildings which predominantly use natural ventilation along with mechanically driven fans to improve predictability of performance over a wider range of weather conditions. Provisioning of the same will be taken into account wherever applicable during designing the ventilation system. b) Manufacturing/ Production area ► Precision machining and QC areas will be provided with central air conditioning. ► Air quality in production area will be checked for vital parameters such as concentration of CO2, CO and other relevant gases during operations. ► In case the parameters above are not acceptable as per relevant standards, adequate capacity fresh air system will be designed and provided for production area to improve quality of air. ► The fresh air supply system will consist of an external air handling unit of adequate capacity with suitable grade filters on inlet side. ► The outlet of the air handling unit will be connected with duct system supplying air inside the production area at various places. ► The fresh air will be discharged in the production area by providing suitable diffusers. c) UPS room ► Appropriately designed ventilation system will be provided to the UPS room. ► The ventilation system will mainly comprise of air conditioning units providing cold air at lower temperature and exhaust system taking out hot air coming out of the UPS. ► The system will be designed to maintain adequate temperature around the UPS equipment as per manufacturer’s requirements/ specifications. ► Humidity will be controlled to the desired level as directed by the UPS manufacturer by controlling inflow of fresh air. ► Proper ventilation will be provided to battery racks with adequate number of air changes as per applicable rules and regulations. Page 212 of 251
Page 1 and 2:
Draft Detailed Project Report New T
Page 3 and 4:
Technology Centre Systems Program -
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Key Components Technology Centre Sy
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Population (in Lacs) Technology Cen
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162: Technology Centre Systems Program -
Page 211: Technology Centre Systems Program -
Page 251: Technology Centre Systems Program -
show all

Draft Detailed Project Report

Create successful ePaper yourself

Delete template?

Save as template?