nx.os.and.cisco.nexus.switching.2nd.edition.1587143046

Now the default route shows up in the neighboring routers, as highlighted in Example 3-27.
Example 3-27. Verification of the Redistribution of the Default Route into EIGRP in
NX-OS
Click here to view code image
Egypt# show ip route
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
0.0.0.0/0, ubest/mbest: 1/0
*via 10.10.10.2, Vlan10, [170/51456], 00:28:57, eigrp-
DataCenter1, external
On an IOS router, you see the default is learned as well but displayed a bit differently, as
shown in Example 3-28.
Example 3-28. Verification of the Redistribution of the Default Route into EIGRP in
IOS
Click here to view code image
Libya# show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B -
BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF
inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA
external type 2
E1 - OSPF external type 1, E2 - OSPF external type
2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1,
L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U -
per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 192.168.1.37 to network 0.0.0.0
172.26.0.0/16 is variably subnetted, 2 subnets, 2
masks
S 172.26.2.0/23 [1/0] via 172.26.32.33
C 172.26.32.32/27 is directly connected,
GigabitEthernet1/48
10.0.0.0/24 is subnetted, 2 subnets