nx.os.and.cisco.nexus.switching.2nd.edition.1587143046

untime interval of these tests.
Example 6-10. Manipulating Runtime Diagnostic Parameters
Click here to view code image
Congo(config)# no diagnostic monitor module 5 test 9
Congo(config)# diagnostic monitor interval module 5 test 3
hour 00 min 00 second 45
Congo(config)# show diagnostic content module 5
Module 5: Supervisor module-1X (Active)
Diagnostics test suite attributes:
B/C/* - Bypass bootup level test / Complete bootup level
test / NA
P/* - Per port test / NA
M/S/* - Only applicable to active / standby unit / NA
D/N/* - Disruptive test / Non-disruptive test / NA
H/* - Always enabled monitoring test / NA
F/* - Fixed monitoring interval test / NA
X/* - Not a health monitoring test / NA
E/* - Sup to line card test / NA
L/* - Exclusively run this test / NA
T/* - Not an ondemand test / NA
A/I/* - Monitoring is active / Monitoring is inactive / NA
Testin
Interval
ID Name Attributes (hh
1) ManagementPortLoopback--------
> C**D**X**T* -NA-
2) EOBCPortLoopback--------------
> C**D**X**T* -NA-
3) ASICRegisterCheck-------------
> ***N******A 00:00:45
4) USB---------------------------
> C**N**X**T* -NA-
5) CryptoDevice------------------
> C**N**X**T* -NA-
6) NVRAM-------------------------
> ***N******A 00:00:30
7) RealTimeClock-----------------
> ***N******A 00:05:00
8) PrimaryBootROM----------------