nx.os.and.cisco.nexus.switching.2nd.edition.1587143046

emaining)
Active is local, weighting 100
Forwarder 2
State is Listen
5 state change(s), last state change 00:00:21
MAC address is 0007.B400.6402 (learnt)
Owner ID is 001B.54C2.78C1
Redirection enabled, 597.458 sec remaining (maximum
600 sec)
Time to live: 14397.458 sec (maximum 14400 sec)
Preemption enabled, min delay 30 sec
Active is 10.10.100.3 (primary), weighting 100
(expires in 7.458 sec)
GLBP Secondary Support
The implementation of GLBP in NX-OS also supports secondary IP addressing. Secondary
IP addresses are typically found in environments that are under transition to a new IP
addressing scheme and are usually temporary.
Example 3-128 shows GLBP configured to provide services to a secondary IP subnet,
172.16.1.0/24.
Example 3-128. Configuring GLBP for Secondary Subnets
Click here to view code image
Congo# config t
Enter configuration commands, one per line. End with
CNTL/Z.
Congo(config)# int vlan 100
Congo(config-if)# ip address 172.16.1.2/24 secondary
Congo(config-if)# glbp 100
Congo(config-if-glbp)# ip 172.16.1.1 secondary
Congo(config-if-glbp)# show glbp
Vlan100 - Group 100
State is Active
4 state change(s), last state change(s) 00:23:27
Virtual IP address is 10.10.100.1
Secondary virtual IP address 172.16.1.1
Hello time 3 sec, hold time 10 sec
Next hello sent in 190 msec
Redirect time 600 sec, forwarder time-out 14400 sec
Authentication MD5, key-chain "nexus"
Preemption enabled, min delay 0 sec
Active is local