nx.os.and.cisco.nexus.switching.2nd.edition.1587143046

Note
You can find a full listing of template options on Cisco.com:
http://tinyurl.com/a96dcbg.
Example 3-89. Configuring BGP Peer Templates
Click here to view code image
Egypt# config t
Enter configuration commands, one per line. End with
CNTL/Z.
Egypt(config)# router bgp 65000
Egypt(config-router)# template peer iBGP-Peers
Egypt(config-router-neighbor)# remote-as 65000
Egypt(config-router-neighbor)# password 3
cd87a249cfe3fb9aefc4f7f321a18044
Egypt(config-router-neighbor)# update-source loopback0
Egypt(config-router-neighbor)# timers 45 120
Egypt(config-router-neighbor)# neighbor 192.168.1.1
Egypt(config-router-neighbor)# inherit peer iBGP-Peers
Egypt(config-router-neighbor)# end
You can verify the peer using the peer template, as demonstrated in Example 3-90.
Example 3-90. Verification of BGP Peer Using the Peer Template
Click here to view code image
Egypt# show ip bgp neighbor 192.168.1.1
BGP neighbor is 192.168.1.1, remote AS 65000, ibgp
link, Peer index 1
Inherits peer configuration from peer-template iBGP-
Peers
Description: Congo
BGP version 4, remote router ID 192.168.1.1
BGP state = Established, up for 00:02:05
Using loopback0 as update source for this peer
TCP MD5 authentication is enabled
Last read 00:00:04, hold time = 120, keepalive interval
is 45 seconds
Last written 00:00:34, keepalive timer expiry due
00:00:10
Received 6672 messages, 1 notifications, 0 bytes in