Rover 214 & 414 Service and Repair Manual - Rover club
Rover 214 & 414 Service and Repair Manual - Rover club
Rover 214 & 414 Service and Repair Manual - Rover club
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10.5b . . . <strong>and</strong> disengage duct from heater<br />
unit<br />
retaining nut. Slacken <strong>and</strong> remove the five<br />
support bracket retaining bolts <strong>and</strong> remove<br />
the bracket from the vehicle (see<br />
illustrations).<br />
8 Disconnect the air recirculation cable inner<br />
from the flap <strong>and</strong> free the cable outer from the<br />
blower motor.<br />
9 Prise out the stud securing the rear heater<br />
duct sleeve to the bottom of the heater unit,<br />
then slide the sleeve down to disengage it<br />
from the unit (see illustration).<br />
10 Disconnect the wiring connectors from<br />
the heater control panel, then remove the two<br />
upper heater unit retaining nuts <strong>and</strong> carefully<br />
manoeuvre the heater unit out of the vehicle<br />
(see illustrations).<br />
Heater matrix<br />
11 Remove the heater unit.<br />
12 Undo the screw securing the matrix outlet<br />
pipe bracket to the heater unit <strong>and</strong> remove the<br />
bracket (see illustration).<br />
13 Slacken <strong>and</strong> remove the two matrix cover<br />
retaining screws, then remove the cover <strong>and</strong><br />
withdraw the matrix from the heater unit (see<br />
illustrations).<br />
14 If the matrix is leaking, it is best to obtain<br />
a new or reconditioned unit as home repairs<br />
are seldom successful. If it is blocked, it can<br />
sometimes be cleared by reverse flushing<br />
using a garden hose. Use a proprietary<br />
radiator cleaning product if absolutely<br />
necessary.<br />
10.13a Undo two matrix cover retaining<br />
screws . . .<br />
10.7a Release wiring connector from<br />
steering column support bracket <strong>and</strong><br />
remove fusebox nut (arrowed)<br />
10.9 Remove retaining stud <strong>and</strong> disengage<br />
rear heater duct sleeve from heater unit<br />
10.10b . . . <strong>and</strong> remove heater retaining<br />
nuts<br />
10.13b . . . then remove cover . . .<br />
1689 <strong>Rover</strong> <strong>214</strong> & <strong>414</strong> Updated Version 09/97<br />
Cooling, heating <strong>and</strong> ventilation systems 3•9<br />
10.7b Remove mounting bolts <strong>and</strong><br />
manoeuvre steering column mounting<br />
bracket out of position<br />
10.10a Disconnect wiring from heater<br />
control panel . . .<br />
10.12 Undo retaining screw <strong>and</strong> remove<br />
matrix outlet pipe bracket<br />
10.13c . . . <strong>and</strong> withdraw matrix from<br />
heater unit<br />
3