2 ОРГАНИЗАЦИЯ И МЕТОДИКА РАБОТ - Courrier international

Parameter to
bedetermined, unit of
measurement
Density at 20º, kg/m³
Kinematic viscosity at
40º, mm²/s
Open flash point, º
Ash content, %
Conclusion
Type of oil product
according to TU
Table 6.1.11 Study of composition and properties of oil products collected at site
269 ( Industrial and construction waste dump)
Standard for
IMSp-46
Actual values of paramaters based on testing results
38.1011007-84 L03-13-23
not more than
1000
890.3
40 - 52 41.63
not lower than
212
200
not more than
0.04
0.50
The results of laboratory study of physico-chemical characteristics show that specimen
L03-13-23 is industrial oil IMSp-46. For all major regulatory indicators, it meets the
requirements 38.1011007-84.
Industrial oil IMSp-46
In the territory of the abandoned polar station 1 specimen was identified as a mix of spent oil
products, 4 specimens as transmission oils of viscosity class 18 and 1 specimen as industrial oil.
FINAL REPORT for Contract No. CS-NPA-Arctic-13/2009 of December 01, 2009 within the framework of pilot project Development of
Technology of clean up of the area of Decommissioned Sites of The Russian Federation Ministry of Defense in the Arctic by the
Example of Alexanra Island of Franz Josef Land Archipelago from Hazardous Waste
126