2 ОРГАНИЗАЦИЯ И МЕТОДИКА РАБОТ - Courrier international

In the course of experimental work on the compaction drum revealed the following.
Carrying out work on the regulations (Figures 8.2 and 8.3) showed that the volume of the
resulting pancake is about (3 - 4) x 2.10 m3. Weight of the pancake is about 20 kg. Given the
density of iron, it is easy to calculate that the amount of 20 kg of iron scrap metal should be
about 2500 cm3, the same volume of the resulting pancake is about 35,000 cm3. Thus, when
transportation will be transported more than 90% air.
In this regard, progress has been decided to change the routine operations on the pressing drum.
Changes were primarily ways of setting up drums in the chamber press - it is installed
horizontally with the open gate (Figures 3.3 and 3.4)
Figure 14.3 Placement of burnt drums in the press without closing gate
FINAL REPORT for Contract No. CS-NPA-Arctic-13/2009 of December 01, 2009 within the framework of pilot project Development
of Technology of clean up of the area of Decommissioned Sites of The Russian Federation Ministry of Defense in the Arctic by the
Example of Alexanra Island of Franz Josef Land Archipelago from Hazardous Waste
216