2 ОРГАНИЗАЦИЯ И МЕТОДИКА РАБОТ - Courrier international

the cavity in the afterburner (4).
The design of afterburner is a nozzle with a channel filled with gas-permeable nozzle (balls, cylinders,
Raschig rings, bulk material).
Use of this technical solution will ensure the elimination of the laminar boundary layer of cold gas, which
is responsible for the formation and preservation of toxic compounds. In addition, attachment facilitates
the relative delay in the chamber of solid carbon particles, which are the main source material for the
resynthesis of dioxins and thus - for their active burnout. The necessary contact time can be provided
either free of the inner channel. Flow sheet of the gas cleaning system (Figure 11.3.5) provides a 3-step
purification of exhaust gases from pollution by different methods.
FINAL REPORT for Contract No. CS-NPA-Arctic-13/2009 of December 01, 2009 within the framework of pilot project Development of
Technology of clean up of the area of Decommissioned Sites of The Russian Federation Ministry of Defense in the Arctic by the Example of
Alexanra Island of Franz Josef Land Archipelago from Hazardous Waste
191
191