User Guide - MKS

Setting Preferences
To be prompted for the default Integrity Server name and
port number each time you log in to Source Integrity, select
the Prompt for Host Name and Port option.
Under User you can specify the following options:
NOTE
In the User Name field, type the user name you want to set as
the default user.
In the Password field, type a password for the user.
If you want to be prompted for the default user name each
time you log in to Source Integrity, select the Prompt for: User
Name option.
If you want to be prompted for the default password each
time you log in to Source Integrity, select the Prompt for:
Password option.
If the security scheme at your site is NT Single Signon (NTSS) the Prompt for:
User Name and Prompt for: Password options are ignored unless you specify a
user name that is different than the logged in user name. For information about
your security scheme, see your administrator.
Optionally, under SOCKS, you can specify a network proxy you
want to connect to. In the Host Name field type the name of the
server, for example, sockshost, or the numerical IP address, for
example, 1.2.34.67. In the Port field, type the port number, for
example, 7761.
3 Do one of the following:
Click OK to save your connection preferences without specifying
any advanced proxy server settings. Your connection preferences
are saved.
Click the Proxy tab to specify advanced proxy server settings. The
Proxy panel appears.
CAUTION
Do not change proxy settings when the client is connected to the
Integrity Server.
45