WSCAD 5.2 - FTP Directory Listing

Getting Started
General
In addition to normal text input and the function keys, you can also access all the
menu commands from the keyboard: simply press the key and the
underlined letters from the menu. You also use the key to quit operations
even in Windows.
Important keyboard functions
There are also some further keyboard functions that are very important:
• The four cursor keys are equivalent to the mouse functions during drawing
operations. Sometimes it is more easy to use these keys instead of the mouse for
positioning. Holding down the key speeds up the cursor movement.
• In most cases, the key has the same function as the left mouse button.
• With or you can move through the individual sheets
in a set of drawings.
• With you can copy the components of a selected area (see “Mouse
operation”), i.e. these components are transferred to a temporary file and onto
the Windows clipboard.
• With or you can re-insert this temporary file. This is the same
as the command ‘insert block’.
• With or you can delete the elements in the selected area.
• With you can activate the UNDO function.
Hint
If you want to enter new text, and text is already entered in the text entry
window, it is automatically selected and shown as an inverse highlight. If
you wish to keep the pre-entered text and just modify it, you either
position the cursor at the appropriate point and press the left mouse
button, or press the key or the key. If you enter
new text directly, the selected text is immediately erased. Previous entered
text you can select by clicking the arrow down button located right of the
text edit line.
Special key combinations
When drawing with destination wiring symbols (DW) the following Shortcuts are
available:
18
Shortcut DW Elements
-left arrow T left
right arrow T right
- up arrow T-top
- down arrow T-bottom
- left arrow Arrows
- right arrow "
- up arrow Angles
- down arrow "