WSCAD 5.2 - FTP Directory Listing
WSCAD 5.2 - FTP Directory Listing
WSCAD 5.2 - FTP Directory Listing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Contact<br />
Design capture<br />
the '!'. Now position the text below the coil. Place the text in the same horizontal<br />
position as the function text 'Table up' and 'Table down' for the valves. Place the<br />
virtual contactor 'Feed backward' and place the function text below the<br />
coil. Now do the same for the contactor 'Worm on' .<br />
Now place an 'NC_power' from the 'Favourites' library for the blocking circuit of<br />
the reversing starter and position it above the coil 'Feed backward’. Assign it to<br />
the coil '!Feed forward' and confirm with 'OK'. Place another 'NC_power' and<br />
position it above the coil 'Feed forward'. Assign it to the coil 'Feed backward'<br />
and confirm with 'OK' again. Place two 'NO_power' and assign these to the motor<br />
circuit breakers ('Feed' and 'Worm').<br />
57