WSCAD 5.2 - FTP Directory Listing
WSCAD 5.2 - FTP Directory Listing
WSCAD 5.2 - FTP Directory Listing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Getting Started<br />
Open line ends<br />
Using destination-wiring symbols with open lines are not allowed. Connection lines<br />
always need a connection.<br />
To complete the drawing, add an 'Corner: left -> bottom' for the Motor protection<br />
circuit breaker '-F' and the fuse '-F', such that there is no open line end.<br />
76<br />
Now complete the connections for the reverse switching circuit. You need<br />
the connectors: 'T right: Target 1 top -> Target 2 right'<br />
and<br />
'T right: Target 1 bottom -> Target 2 right' and the corresponding<br />
angles.<br />
Completing the drawing sheets<br />
Now complete Sheet 1 and Sheet 2 with the connectors (destination wiring<br />
symbols), as shown in the example drawing in the appendix.<br />
The potential arrows will be added later. Please note also that the lamp '-P1' will be<br />
added to page 2 later.
Change language