WSCAD 5.2 - FTP Directory Listing

Input via Terminal Number
Interesting for user Basic - Compact and Professional version
Design capture
With this method, you can assign the terminal number separately for each
individual terminal. In the menu, select 'Modify – Terminal / Cable numbers'
and from the '-X1' terminal strip select the first terminal.
At the prompt (Input Pin Number) type in '1' and confirm with . The
terminal is now labelled and you are immediately prompted for the next terminal in
the terminal strip. Continue until you have reached the 'PE' connection of motor
M1 (M2 as well). Here enter 'PE' as the designation. (But you should increase
your logical terminal numbering by one for the next terminal number).
Confirm the existing inputs with (if you don't want to change it), when
you reach the final connection in the terminal strip of the current drawing sheet,
the input routine will be terminated.
45