Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

Chapter 14: Configuring Virtual Private Networks
Configuring client address pools
410
Figure 176: Client
Address Pools: Subnets
tab
Configuring the
Subnets tab
Configuring the Subnets tab
To configure the virtual subnet address, select VPN Configuration > Client
Address Pools and select the client address pool that you want to configure
from the Pools list. The following tab appears.
The Subnets tab allows you to define the virtual address subnet for this
address pool. You can also specify any local networks that you want to be
accessible to remote clients using this pool. Follow the steps below.
1 Configure the Virtual Subnet List. This list defines the virtual subnets that
define the IP address ranges that are available within this pool. The
following options are available:
• Create a new virtual subnet—Click New to define a new entry in the
Local Subnet List. See “Adding or modifying a subnet address” for
details.
• Modify a virtual subnet—Select the subnet you want to modify and click
Modify to modify an existing entry in the Local Subnet List. See “Adding
or modifying a subnet address” on page 411 for details.
• Delete a virtual subnet—Select the subnet you want to delete and click
Delete to delete an existing entry from the Local Subnet List.
2 Configure the Local Subnet List. This list defines the local networks
available to remote clients that establish a VPN association using an
address from the client address pool. The following options are available:
• Create a new local subnet—Click New to define a new entry in the Local
Subnet List. See “Adding or modifying a subnet address” for details.
• Modify a local subnet—Select the subnet you want to modify and click
Modify to modify an existing entry in the Local Subnet List. See “Adding
or modifying a subnet address” on page 411 for details.