Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

Figure 213: Network
Traffic: Interface Status
window
About the Network
Traffic: Interface
Status window
Figure 214: Network
Traffic: Active VPNs
window
About the Network
Traffic: Active VPNs
window
Chapter 18: Monitoring
Viewing network traffic information
This window provides traffic information for each of the physical and VLAN
network interfaces on this Sidewinder G2.
• Interface — Displays the name of the interface
• IP Address — Displays the IP address assigned to that interface
• Status — Displays if the interface’s status is up (ready for an active network
connection) or down (will not accept an active network connection)
• Connected — Displays Connected if Sidewinder G2 detects an active
network connection and Disconnected if it does not
You can also view this information at a command line interface by typing
netstat -is.
When you are finished viewing the status, click Close.
This window allows you to monitor the status of all configured VPNs. The
statuses include:
• Idle — No active session.
• Active — One or more VPNs have active sessions established for this
VPN.
Click Refresh to update the information. Click Close to return to the main
window.
519