Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

Adding or modifying
a subnet address
Figure 177: Client
Address Pools:
Servers tab
Chapter 14: Configuring Virtual Private Networks
Configuring client address pools
• Delete a local subnet—Select the subnet you want to delete and click
Delete to delete an existing entry from the Local Subnet List.
Important: The client machine’s IP address should not match the internal
network’s subnet, as this configuration could cause internal routing and connectivity
issues.
To add or modify an IP address/netmask combination in the New/Modify
Virtual/Local Subnet window, follow the steps below.
1 In the Virtual/Local Subnet field, type the IP address that will be used to
define:
• For the Virtual Subnet field—The network portion of the IP addresses
used in the client address pool.
• For the Local Subnet List—The network portion of the local network
that will be made available to the VPN clients.
2 In the netmask field, specify the number of bits to use in the network mask.
The network mask specifies the significant portion of the IP address.
3 Click Add.
4 Click the Save icon.
Configuring the DNS and/or WINS servers
To configure the DNS and/or WINS servers, select VPN Configuration > Client
Address Pools. Create a new entry or select an existing one, and then select
the Servers tab. The following window appears.
411