Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

Figure 233: System
Responses: Response
Settings window
About the System
Responses:
Response Settings
Configuring the e-mail settings
Chapter 20: IPS Attack and System Event Responses
Creating system responses
To view, add, modify, or delete the e-mail addresses that will receive alerts,
click Response Settings, in the System Responses main window’s lower right
corner. The following window appears:
This window is used to configure the e-mail address list that will receive alerts.
For every triggered system event response that is set to send an e-mail alert,
each e-mail address listed here will receive an alert. You can add, modify, or
delete entries by using the buttons describe here:
• New — Click this button to define a new e-mail address to receive system
event alerts. See “About the Modify System Responses: Event tab” on page
573 for more details.
• Modify — Select an entry and click this button to modify an existing e-mail
address. See “About the Modify System Responses: Event tab” on page
573 for more details.
• Delete — Select an entry and click this button to delete that e-mail address.
About the Response Settings: New/Modify window
This window allows you to add or modify an e-mail address for the list of e-mail
addresses to send an alert to during a system response. To change this list, do
the following:
1 In the E-mail address field, either type a new e-mail address or edit an
existing e-mail address.
2 Click OK to return to the Response Settings window.
3 Click OK on the Response Settings window to save your changes.
577