Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

Configuring the
OSPF Areas:
Networks window
Figure 246: OSPF
Advanced window
Appendix C: Configuring Dynamic Routing with OSPF
Setting up OSPF routing on the Sidewinder G2
1 In the Authentication Key field, specify the clear text value that must be
present on all packets. This entry may be one to eight decimal digits
separated by periods, a one to eight hexadecimal string preceded by 0x, or
a one to eight character string in double quotes. More than one
Authentication key can be defined. The only requirement is that the keys do
not share the same Start Generate time.
2 (md5 authentication only) In the Id Number field, specify a value from
1–255.
3 In the Start/Stop Generate fields, define the time when gated will use the
key to sign outgoing packets.
4 In the Start/Stop Accept fields, define the time gated will use the key to
validate incoming packets.
Note: The Generate/Accept fields are optional fields that specify when an md5
key is valid. If you specify any time value, you must also specify all other time
values. Specify overlapping valid times to ensure service is not lost. Also,
multiple keys cannot share the same Start Generate or Start Accept times.
The Networks area on the OSPF Areas window should not be configured
unless directed to do so by Secure Computing Technical Support.
Configuring Advanced options
To configure advanced options, start the Admin Console and select Services
Configuration > Routing > Dynamic. Click the Advanced tab, the following
window appears:
611