18.07.2013 Views

Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

Sidewinder G2 6.1.2 Administration Guide - Glossary of Technical ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 2: Administrator’s Overview<br />

Administering <strong>Sidewinder</strong> <strong>G2</strong> using Telnet<br />

38<br />

Connecting to the <strong>Sidewinder</strong> <strong>G2</strong> using Telnet<br />

Note: You must enable the Telnet server in the appropriate burb(s) before you will<br />

be allowed to Telnet. See “Setting up an internal (trusted) Telnet server” on page<br />

36.<br />

1 Telnet to the <strong>Sidewinder</strong> <strong>G2</strong> and log in by typing the following command,<br />

using your <strong>Sidewinder</strong> <strong>G2</strong> host name.<br />

telnet hostname<br />

When prompted, enter your <strong>Sidewinder</strong> <strong>G2</strong> authentication information.<br />

Depending on the authentication method configured for you on the<br />

<strong>Sidewinder</strong> <strong>G2</strong>, you must now provide a valid password or a special passcode<br />

or personal identification number (PIN) before you are logged on to<br />

the <strong>Sidewinder</strong> <strong>G2</strong>.<br />

2 Enter the following command:<br />

srole<br />

Enter commands from the UNIX prompt as required. Refer to Appendix A or<br />

the man pages for information on using individual commands.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!