HP 8648 A/B/C/D - Changpuak.ch

PAGing Subsystem [SOURceI
(Option 1EP Only) :PAGing
[:FORMat]
:SELect POCSag I FLEX I FTD I RESYnc I PN15
Sets the pager format to POCSAG, FLEX, FLEX-TD (FTD), RESYNC, or
PN15. *RST value is FLEX.
For POCSAG/FLEX/FLEX-TD/PN15
[SOURceI
:PAGing
[:FORMatl
:CPOCSaglFLEXIFTDIPNl5>
:RATE?
:RATE CNRl>
Sets the data rate as follows depending on the format selected:
For FLEX/FLEX-TD: 1600, 3200, or 6400.
For POCSAG: 512, 1200, or 2400.
For PN15: 512, 1200, 1600, 2400, 3200, 6400.
*RST value is 1600 for FLEX/FLEX-TD or 512 for POCSAG and PN15.
Note To set or change the data rate, the FSK level must be set properly. For
example, when you want to set the data rate to 6400 bps, 4-level FSK
for FLEX pagers, send the following commands:
PAG:FLEX:RATE 6400
DM:FORM FSK4
DM:DEV 4.8 KHZ
DM:STAT ON
For POCSAG/FLEX/FLEX-TD
[SOURceI
:PAGing
[:FORMat]
: