HP 8648 A/B/C/D - Changpuak.ch

Spurious
Performance Test
Connect the Test
Equipment
Configure the
Spectrum Analyzer
Configure the HP 8648
Measure Spurious
Levels
E-20 Performance Tests
Test Record
anEUa2d
1. Frequency span 500 kHz
2. Resolution BW 1 kHz
3. Video BW 1 kHz
Figure 8-14. Spurious Equipment Setup
1. Turn the RF output on; press C-ON/OFF).
2. Turn modulation off; press IMOD ON/OFF).
1. Measure the levels of the spurious signals shown in the test record.
2. Convert the measured levels to decibels below the fundamental
(dBc) and compare the results to the corresponding limits.
HP 8648A .................................................. Table 8-14
HP 8648B ................................................... ‘lhble 8-35
HP 8648C ................................................... Table 8-60
HP 8648D .................................................. .%ble 8-85