HP 8648 A/B/C/D - Changpuak.ch

Function
I- / I
I /
1’gMRl
0 non 000
1 b-l 8 Operation Reference
EO
Setting the Protocol
The protocol menu displays the following information when
“A0000001” is the previously entered capcode.
mEPU=NCY B MODUI.A~ION - AMPL,,,,~
CYCLE 00 FFL4ME 000 PHASE A
COLLAPSE CYCLE 0 REPEAT 0
These parameters, except for CYCLE, are all automatically set when
the capcode is entered in the PAGER CODE data field:
CYCLE: Defines the start cycle. The allowable range is 0 to 14.
an613abc
w FRAME: Defines the start frame where the message is located. The
allowable range is 0 to 127.
PHASE: Defines the phase for the pager. The allowable range is A, B,
C, or D.
w COLLAPSE CYCLE: Determines how many times a message repeats
within a cycle when BURST or CONT is active in the encoding MODE
setting. The default setting of 4 will repeat the message once every
16 frames (24). The allowable range is 0 through 7.
REPEAT: Displayed only if FLEX-TD is selected in the format menu.
Defines the repetition transmission value. Determines how many
cycles the message will be repeated. The allowable range is 0 to 3.