HP 8648 A/B/C/D - Changpuak.ch

1. ENCODER
1 '
00000
00000
00000
D00000
pLY=cJ
Function
Note Before selecting the pager encoder mode check that the correct pager
carrier frequency and FM deviation have been set.
To select the pager encoder mode, press m (ENCODER) twice:
once to set FM deviation, then again to toggle between the standard
functions and the pager encoder mode. The display will look like the
following:
FORMAT
POLARITY
FLEX
NORMAL FILTER ON
7
Enccdel.drw
This format menu is always displayed first when the pager encoder
mode is selected.
The @) (PREV) and ($J (NEXT) keys are used to move the blinking
cursor between each parameter.
The knob in the AMPLITUDE/ENCODER block is used to select the
desired setting for each pager encoder parameter.
To start or stop encoding, press @iGZ=iSET) (START/STOP).
Operation Reference 1 b-7