HP 8648 A/B/C/D - Changpuak.ch

Entering Pager
Encoding Settings
Selecting the Format
Settings
1. Display the first pager encoder menu.
After setting your pager’s carrier frequency and an FM deviation
of 4.8 kHz (for a FLEX pager) on the signal generator, press the
a (ENCODER) key once again to display the first pager encoder
menu (FORMAT). The (KiJ (ENCODER) key toggles between the
frequency modulation menu and the pager encoder menu.
FREQuENcl B MODmION
FORMAT FLEX
POLARITY NORMAL FILTER ON
2. Set FORMAT to FLEX, POLARITY to NORMAL, and FILTER to ON.
Encodel.drw
a. With the blinking cursor on the “F” of FORMAT, set the FLEX
format by rotating the AMPLITUDE/ENCODER knob until FLEX
is displayed.
b. Press the (JJ (NEXT) key to move the blinking cursor to
POLARITY, then use the AMPLITUDE/ENCODER knob to set
the polarity to NORMAL.
c. Using the (7JJ (NEXT) key and the AMPLITUDE/ENCODER
knob, set FILTER to ON.
v
FREpuENol B MODuLA!mON ~AMPLIlvDE
FORMAT FLEX
POLARITY NORMAL FILTER ON
Press the (JJ) (NEXT) key to move to the next page.
Encodel.drs
Operation Examples la-27