HP 8648 A/B/C/D - Changpuak.ch

Function
lb-12 Operation Reference
Setting the Message
The message menu looks like the following:
MESSAGE NO.1 MESSAGE LENGTH 40
w MESSAGE NO. is defined as the following where “X” represents the
phase setting:
0: Arbitrary message set from the external controller using the
HP-IB capability. The data must be entered in units of words.
Refer to “[SOURceI :PAGing [:FORMat] :(POCSaglFLEXIFTD)
:ARBitrary :DEFine , , . . . , " and “Using
the Buffer Memory for the Arbitrary Messages” in Chapter 2.
START FRAME and STOP FRAME are defined in the following
menu:
FREQLENCY- MODULATION - AMPLII’UDE
START FRAME 000 STOP FRAME 127
encode22.drw
The frames between the START FRAME and STOP FRAME will be
transmitted. The allowable ranges for both are 000 to 127.
1: Displays: 0123456 [Xl
where “X” = “0” for phase A, “1” for phase B, “2” for phase C,
“3” for phase D.
2: Displays: ABCDEFG [XI
where “X” = phase “A”, “B”, “C”, “D”.
3: Displays: TEST PAGING :XXXXXXX
where “XXXXXXX” = “PHASE A”, “PHASE B”, “PHASE C”, or
“PHASE D”.
4: Displays: ALPHANUMERIC 40CHARS TEST PAGING :XXXXXXX
where “XXXXXXX” = “PHASE A”, “PHASE B”, “PHASE C”, or
“PHASE D” .
5: Displays: 8888888888888888888888888888888888888888