HP 8648 A/B/C/D - Changpuak.ch

Installation
Unpacking Your
1. Unpack the contents of the shipping container.
Signal Generator 2. Inspect the shipping container for damage.
If the shipping container is damaged or the cushioning material
inside is stressed, keep them until you have checked the
instrument for proper operation.
3. Inspect the signal generator to ensure that it was not damaged
during shipment.
If mechanical damage or defects have occurred, notify the carrier
as well as the Hewlett-Packard office. Keep the shipping materials
for inspection by the carrier.
Warning To avoid hazardous electrical shock, do not connect AC power to
the instrument when there are any signs of shipping damage to
any portion of the outer enclosure (cover and panels).
Caution Ventilation Requirements: When installing the instrument in a
cabinet, the convection into and out of the instrument must not be
restricted. The ambient temperature (outside the cabinet) must be
less than the maximum operating temperature of the instrument
by 4 “C for every 100 watts dissipated in the cabinet. If the total
power dissipated in the cabinet is greater than 800 watts, then forced
convection must be used.
3
Installation 3-1