HP 8648 A/B/C/D - Changpuak.ch

Running the Tests and Adjustments
,$?e~W~/ ..I ,I#,), -T
ouT “FnI.IC S~,,ol, 1111101214 1
sa,aad ,a.l* S.leS(@d ,-.I R#.““.
Figure 7-49. HP Service Support Software Window
Once the HP Service Support Software window is displayed,
1. Select the Run button to start the automated tests or adjustments
displayed in the Selected Tests box.
The software steps through the tests or adjustments sequentially.
2. Follow the instructions displayed on the PC monitor.
Each automated performance test or adjustment is described in
detail in Chapter 7 or Chapter 8. These description compliment the
instructions provided by the software.
Reviewing the Test and Adjustment Results
Once the tests have finished running, you will want to review the
results of the tests. The HP Service Support Software window
displays the DUT model number and serial number, the selected tests,
the results of the selected test, and the current test information. Six
buttons, which are used to control the testing, are also displayed..
Figure 7-50.
HP Service Support Software Window Displaying Test Results
The Selected Tests box displays the name of the selected tests, the
pass-fail status (P/F) of each test that has been run, the total number
of points that each test checks, and the number of points that passed
and failed for each test. The pass-fail status indicates a failure if any
point in that test fails.
Adjustments 7-47