HP 8648 A/B/C/D - Changpuak.ch

2. Once the User Information dialog box (Figure 7-45) is displayed,
enter the user name and the password.
a. In the User Name box 0, enter User. (Case is important.)
b. In the Password box 0, enter User. (Case is important.)
c. Select the OK button.
Identifying the DUT
wk758a
Figure 7-45. User Information Dialog Box
Serial Numtm A&h?tt
in
Figure 7-46. DUT Selection Dialog Box
When the “DUT Selection” dialog box is displayed,
1. Make sure that HP8648 is selected in the Select an Instrument
Family list.
2. In the Select Model list, select the instrument model of the DUT to
be adjusted or tested.
3. In the Serial Number box, enter the complete serial number of the
DUT.
4. In the Address box, enter the two-digit HP-IB address of the DIJT.
Press the ~ key to display the DUT’s IIP-II3 address.
5. Select the OK button.
Adjustments 7-43