HP 8648 A/B/C/D - Changpuak.ch

Shipping th.e
Signal Containers and materials identical to those used in factory packaging
are available through Hewlett-Packard offices. If the instrument
Generator
is being returned to Hewlett-Packard for servicing, attach a tag
indicating the type of service required, return address, model number,
and full serial number. Also, mark the container FRAGILE to assure
careful handling. In any correspondence, refer to the instrument by
model number and full serial number.
3-6 Installation
If you are using other packaging, follow the guidelines below:
1. Wrap the instrument in heavy paper or plastic.
2. Use a strong shipping container. A double-wall carton made of
2.4 MPa (350 psi) test material is adequate.
3. Use enough shock-absorbing material (75 to 100 millimeter layer;
3 to 4 inches) around all sides of the instrument to provide a firm
cushion and to prevent movement in the container. Protect the
front-panel with cardboard.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE to assure careful handling.