HP 8648 A/B/C/D - Changpuak.ch

FhRud hth Ih* PDllam 0°C 1 you ham4”ST RCPtAcLD WE
YOTHERBO*RD m n HP8618 RF Sipnal Pcnaa~m,, 011 yor BS
“Pdaliq IJn OPTlO” cm”6”RA,,0II.
Pm..* OK ,rsp*s* paw.ord, to u,sd*s q+.,nt (I UWCEL 10 view
aqlqnanc *Id”* m!y.
Figure 7-73.
Password Requested by User Information Dialog Box
3. The HP8648 Motherboard Repair Utility window is displayed along
with the following information that is stored in the motherboard.
Refer to Figure 7-74.
The instrument serial number Q
w The instrument model number 0
The attenuator part number and serial number Q
(HP 8648B/C/D only)
The options installed in the instrument @
C 1
C 3
Please enter the HP-IB addraxs to
a&+blirh communication with tha DUT
Enter the DUT cunent addnzst
m
rEnta tbe derived Serial NumLaer,-1
Enter the desired Al 1 Attenuator Numbers
Progress Indicator
KCCCO
piiz-j~ I]
-Select the desired Model
0 HP864BA
@ HPB64BB
Select the installed Options
0 lE5. HIGH STABILITY TIYEBASE
0 lE6 - PULSE MODULATION
0 1EA - HIGH PDWER -c
0 1EP. PAGER/ENCODER
[7 HDl - RF REMAINS IN SAME STATE
0 lE2 -AUDIO DSClLlATDR
Figure 7-74. ED'8648 Motherboard Repair Utility Window
4. When you have finished reading the information stored in the
motherboard, select the Cancel button to exit the program.
The Get Data can be used if your checking the data stored on
additional motherboards.
Adjustments 7-69