HP 8648 A/B/C/D - Changpuak.ch

Function
PN15
Setting the Data Rate
If PNl5 modulation is selected in the format menu, the following
parameters must be set to complete the pager encoder setup process.
H DATA RATE
512/2: 512 bps, 2-level FSK
1200/2: 1200 bps, 2-level FSK
1600/2: 1600 bps, 2-level FSK
2400/2: 2400 bps, 2-level FSK
3200/2: 3200 bps, 2-level FSK
3200/4: 3200 bps, 4-level FSK
6400/4: 6400 bps, 4-level FSK
encode30,drw
Note This setting is required only when PNl5 is selected in the format
menu. The m (PREV) and (IJJ (NEXT) keys toggle the format menu
and this PN15 FSK data rate menu. No other menus are displayed.
( > ~~~g~l;~;;~ar; \ / IIY
‘1
L I
1 b-34 Operation Reference
Message During Encoding
To start and stop encoding, press the @ZCZY] (START/STOP) key.
- FREQUENCY- MODULATlON - AMP
PN15 SENDING
AMPLITUDE O.OdBm
I
encode31 Aif
Note If the RF output is turned off, AMPLITUDE x . xdBm will be substituted
for RF OFF. While encoding, the blinking cursor is on the first
character A of AMPLITUDE or R of RF OFF.
J