HP 8648 A/B/C/D - Changpuak.ch

d. Select the Add button to add the device to the list in the
Selected Test Equipment box.
The following buttons are available for the Selected Test
Equipment box:
Button
Add
Action
Copies the test equipment highlighted in the
Available Test Equipment box to the Selected
Test Equipment box.
Remove Removes the highlighted test equipment from
the Selected Test Equipment box.
Clear Removes all of the test equipment from the
Selected Test Equipment box.
Changing the HP-IB If necessary, the test equipment HP-IB address can be changed ufier
Address
it is added to the Selected Test Equipment box. Change the HP-IB
address by pressing the right arrow on the keyboard until the HPIB
Address selection in the Selected Test Equipment box is selected. The
HP-IB address is selected when it has a dark box around the selection.
Then, type the new HP-IB address and press Enter to change the
address.
e. Repeat the previous steps for each test equipment instrument.
4. Once the test equipment has been identified, select the Add
button located above the Selected Tests box to add each of the
highlighted tests or adjustments. The tests or adjustments that
were highlighted are now displayed in the list in the Selected Tests
box.
The following buttons are available for the Selected Tests box:
Button Action
Add Copies the tests and adjustments highlighted in the
list of tests and adjustments to the Selected Tests
box.
Remove Removes the highlighted tests and adjustments
from the Selected Tests box.
Clear Removes all of the tests and adjustments from the
Selected Tests box.
5. If the appropriate tests or adjustments are listed in the Selected
Tests box and the appropriate test equipment is listed in the
Selected Test Equipment box, select the OK button.
Adjustments 7-45