HP 8648 A/B/C/D - Changpuak.ch

7-56 Adjustments
Adding Device Drivers
Caution The following three procedures: Adding/Removing Device
(Test Equipment) Drivers, Adding/Removing Test Drivers, and
Adding/Removing Datapacks are included for informational purposes.
These procedures should only be used when instructions are provided
describing which drivers or datapacks need replacement or removal.
Follow these instructions to add test equipment device drivers to the
program:
1. Log into the software normally until Select Test Equipment and
Tests window is displayed. Click the Cancel button to close the
Select Test Equipment and Tests window (item 3 in Figure 7-57).
‘-e
lhEd.bl’ WaMAa I
1
Rcwid Tn, Epuipncnl. Araiidde ,“I ELpiP#w”,.
I~~
ssbcmd Tsx,* Sdsc,sd Ted Eqip.c.“t
‘W I Rx4-( clu I Admy RaphI a&w j
11 ~~~~~
f---iiq ‘- ;
-1
----a
Figure 7-57. The Select Test Equipment and Tests Window
2. Refer to Figure 7-58. In the File drop-down menu, select Test
Equipment Drivers (item 21).