HP 8648 A/B/C/D - Changpuak.ch

2-34 HP-IB Programming
[SOURceI
: PAGing
1: FORMat]
:{FLEXjFTD)
: DCALl
: STATe?
: STATe ON I OFF I 1 I 0
Sets the dummy call function to ON or OFF. *RST value is OFF.
ON:
OFF:
Activates the Dummy Call function. Sets a message with
all 5s (0101 in numeric format), which is automatically
defined, to the all non-call phases to equalize the FSK
deviation. An address for the non-call phases must be
set.
Does not activate the dummy call function. Idle frames
are set to the all non-call phases.
:ADDR(112)?
:ADDR(ll2)
Sets the dummy call address 1 and 2. *RST values are 0032769 for
address 1 and 0000000 for address 2.
: ROAMing
: SELect?
: SELect NONE I SSID I NID
Selects the roaming mode to NONE, SSID, or NID. *RST value is
NONE.
NONE:
SSID:
NID:
Tests a pager without the roaming mode.
Tests a pager in the SSID roaming mode which responds
to a simulcast transmission system. The Frame Offset
function is added.
Tests a pager in the SSID and NID roaming mode. The
NID mode, in addition to the SSID mode, is a roaming
network for covering wider multiple areas.