Stereo Scan 440 - DCU

1'-14
Chapter 1 Getting Started - -"" - -.
FIgUte 1. 7 Na~ Box
The edges of the box representhe limits of the variable range (eg- 100%, +
100%) and cross hairs indicate the centre of the box, not necessarily the centre of
the range. The cun-ent parameter value is indicated by a red marker. The
parameter value may be adjusted by dragging the marker to the required position.
Alternatively the X and Y values may be individually adjusted using the scroll
bars and the parameter set to zero using the origin button (labelled with 0) at
the junction of the X and Y scroll bars. H this button is selected the current
parameters are set to zero.
This method of adjustment is also to be found within control panels such as
Stigmation.
Stage Window (if stage molorised)
This Stage Window, see Figure 1.8, represents the XY co-ordinate space of the
stage and provides both joystick and absolute move~nt facilities for a motorised
stage. Pressing the right mouse button over the window displays a popup ~nu
which gives access to the stage functions from which co-ordinate storage (if
installed) can be obtained.
Move~nt of the stage is controlled by dragging the blue dot within the stage
window. The blue dot represents the joystick and its deflection causes the stage to
move in the direction of deflection. The speed of stage move~nt is linked to
both the extent of joystick deflection and the current image magnification. For
further infonnation on Goto mode and co-ordinate storage, see Appendix E,
Options .
]
1
Slereoscan 440 Operator Manual