Stereo Scan 440 - DCU

2.
2.1 Stage Motorisation
The stage motorisation kit is available for either X and Y or X Y and Z stage
axes. Included are over travel protection and audible touch alarm. This
accessory is required for the software options:-
Stage Conb"ol
Stage Co-Ordinate Store and Recall
Stage Centre Feature
Stage Cenb"e Point
Stage Map
Stage Scan
2.2 High Resolution Record Unit (HRRU)
Introduction
The Stereoscan 400 Series HRRU is a pod fitted to the right hand side of the
instrument. It is connected to the instrument internally by two fibre-optic
connectors, and externally by a mains lead which is plugged into the mains
connection block at the rear of the instrument.
The HRRU is capable of taking either a Stored or a Live Image micrograph with
or without an Overlay (Data Zone or other annotation), using a variety of camera
types at different record rates and with different film speeds. It is also ~ssible to
set the developmentime required for a particular type of film.
In order to operate, the system must know that an HRRU is actually fitted, and
this can be checked by looking at the Options section of the Configure menu.
This is reached by selecting from the Menu Line:-
Tools -> Service ->Configure -> Options
The HRRU line should read HRRU = Mark 2
Stereoscan 440 Operator Manual