Stereo Scan 440 - DCU

It is used as follows:-
1 Press the select area button.
Messages will be displayed in the image caption area to guide you.
2 Select one comer of the area to be scanned
Over the image click on one comer of the area to be scanned. Once this
point is selected there is no need to hold the mouse button down. A
rectangle will be drawn representing the scan aJea. If required you may
cancel this function with the right mouse button.
3 Select the opposite comer or the area to be scanned
Over the image click on the opposite corner.
Stage Scan : Commands
There are three commands provided:-
Start scan
This moves the stage to the start position and sets the scan status to at
field.
2. Next step ( Button labelled -»
This moves to the next field in the scan pattern. If the current field is the
last field in the pattern the stage is not moved but the scan status is set to
end scan .
~
The
3. Previo~ step ( Button labelled