Stereo Scan 440 - DCU

If the box marked Fast is selected, then a fast record speed is perfonned, and if it
is not, then a slow record rate will be perfonned.
~ ~
It should be noted that once the various photo settings have been made it, is
not necessary to access these panels every time that a photo dump is
required. lithe Output Device has been set to be the HRRU, all that is then
required to initiate a Micrograph recording is to select the Photo Icon in
the TOOL bar with the left mouse button. Ensure that the image is frozen, if
a Stored image is required or NOT if a Live image is required.
HRRU Camera
The Stereoscan 400 Series can accommodate a variety of camera types. Each
camera type fits onto a camera assembly which slots into the HRRU CRT
assembly. To gain access to the HRRU. simply slide the top cladding away to the
rear of the HRRU CRT assembly.
. Polaroid 545
The lens unit is setup as shown in Figure 3. The lens unit is fitted to the c~ra
body using 4 M4 X 2Omm screws.
Figure 3 Polaroid Camera Lens Mounting
The camera unit is then inserted into the camera housing with the red spot
towards the operator. It is important to ensure that the unit has been inserted as
Stereoscan 440 Operator Manual