Stereo Scan 440 - DCU

2-24 Chapter 2 Operation
The Zone
The basic concept underlying all the display and scanning modes it that of a
ZONE. A zone is an area of image store which can be mapped onto part of the
image window. In normal imaging only one zone is used, but for split or quad
modes two or more zones are required.
Inputs
n
Associated with each zone are two input signals A and B which can be selected
from the list of detectors configured on the system. The full chain of processing is
shown in Figure 2.4.
FIgUre 2.4
The signal mixing and Input LUT can be adjusted by the user if the appropriate
software option has been purchased. otherwise the default settings will apply (no
mixing, output = input LUT).
The Anchor Symbol
When working in a display mode with multiple visible zones the anchor symbol
will appear.
Stereoscan 440 Operator Manual
I
~
~