Stereo Scan 440 - DCU

There is a LINK facility (use Top Menu - tools - links) provided which enables
the user to inhibit the use of beam shift for this function below a specified
magnification.
Procedures
-+~...
,,!~1;i
When the function is selected the cursor will change to a foor arrow symbol
(see margin) and the caption of the image window will indicate that the
user is expected to select a point with the left mouse button or cancel the
function by pressing the right mouse button over the image window.
The software will attempt to use the beamshift to move the point to the cenb"e of
the screen. If the movement required is outside the range of the beamshift then a
stage movement will be used. with the positioning such that following the move
the beamshift will be zero.
1.15. Stage Control
Introduction
This facility provides the software control for a motorised stage. The
functionality is provided as part of the standard software but requires the stage
motorisation hardware option.
Operation
Configuration
The stage type and the axes that are motorised must be defined in the
configuration window options list.
The Configuration window is displayed by selecting Top Menu - Tools - Service
Configure.
Limits and Touch Alarm
On each axis there are 7 states:-
None
Low Outer Limit
Low Inner Limit
Low User Limit
Stereoscan 440 Operator Manual