Stereo Scan 440 - DCU

Keyboard Control
The cursor (arrow) keys may be used to coDttol the stage as follows:-
Use of ARROW keys for Stage XY control
If S is pressed the ARROW keys are temporarily assigned to conb'ol the stage XY
position. While an ARROW key is held down the stage moves in the
appropriate direction. Steps may be coarse or fme as defined by the toolbar icon
or using the tab key.
If Esc is pressed while the stage is moving the movement is aborted.
~
. To Return to default use of the ARROW keys press I.
Use of ARROW keys for field stepping
If sbJft S is pressed the ARROW keys are temporarily assigned to perfonn field
stepping.
While in this mode pressing an ARROW key will step the image by an exact field
size in the appropriate direction. In SPLIT and QUAD modes the step size is
correspondingly sized. The movement is achieved by a combination of stage
movement and beamshift as used in the centte pointfunction.
To Return to default use of the ARROW keys press I.
Use of ARROW keys for Stage Z control
If Z is pressed the ARROW keys are temporarily assigned to control the stage Z
position.
While an up/down ARROW key is held down the stage moves in the appropriate
direction.
Steps may be coarse or fine as defmed by the toolbar icon or using the tab key.
If Esc is pressed while the stage is moving the movement is aborted
To Return to default use of the ARROW keys press L
Stereoscan 440 Operator Manual