Stereo Scan 440 - DCU

The map may be removed using Close map from the popup menu or by selecting
Normal mode scanning.
~
~
Any positions recorded are preserved and may be saved/used by the Stage
Move Window Record junctions.
Alternatively Remap from the popup menu will save a new stage position and
magnification for the map.
Hint
If on requesting stage map the stage backlash correction is off and you require
accurate positioning:-
Unfreeze the image (press scroll lock on the keyboard).
2. Select backlash correction to be on (V) from the popup menu.
'3.
Select execute backlash from the popup menu.
4. Select Remap from the popup menu.
1.18. Stage Scan
Introduction
The Stage scan software option provides the facility of using the motorised stage
to inspect an area of the specimen as a series of fields.
There is a choice of four types of scan pattern, and several methods of defming
scan areas.
Once the scan pattern is defined commands may be used to step through the
fields.
The stage window also provides buttons which give access to the label and centre
point functions (if licensed).
Stereoscan 440 Operator Manual