Agilent 34970A/34972A Data Acquisition / Switch Unit

Chapter 2 Quick Start
If the Instrument Does Not Turn On
1 Remove the power cord. Remove the
fuse-holder assembly from the rear panel.
2 Remove the line voltage selector from the
assembly.
2
4
Fuse: 500 mAT (for all line voltages)
Agilent Part Number: 2110-0458
3 Rotate the line-voltage selector until the
correct voltage appears in the window.
4 Replace the fuse-holder assembly in the
rear panel.
100, 120 (127), 220 (230), or 240 VAC
Verify that the correct line voltage is selected and the power-line fuse is good.
51