Agilent 34970A/34972A Data Acquisition / Switch Unit
Agilent 34970A/34972A Data Acquisition / Switch Unit
Agilent 34970A/34972A Data Acquisition / Switch Unit
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The <strong>34970A</strong> Rear Panel at a Glance<br />
4<br />
1 Slot Identifier (100,200, 300)<br />
2 Ext Trig Input / Alarm Outputs / Channel<br />
Advance Input / Channel Closed Output<br />
3 RS-232 Interface Connector<br />
4 Power-Line Fuse-Holder Assembly<br />
5 Power-Line Voltage Setting<br />
6 Chassis Ground Screw<br />
7 GPIB (IEEE-488) Interface Connector<br />
Use the Menu to:<br />
• Select the GPIB or RS-232 interface (see chapter 2).<br />
• Set the GPIB address (see chapter 2).<br />
• Set the RS-232 baud rate, parity, and flow control mode (see chapter 2).<br />
WARNING<br />
For protection from electrical shock, the power cord ground must not be<br />
defeated. If only a two-contact electrical outlet is available, connect the<br />
instrument’s chassis ground screw (see above) to a good earth ground.<br />
9
Change language