CinePlex v3 Manual - Plexon Inc

3 In the Control View, click Connect. VTViewer plots the real-time location of
the target animal on the grid as shown in the following illustration. The
illustration shows a Object Contour-mode plot that includes motion measure
data.
Note:
The motion measure chart does not move until the center of gravity is
sent to the PLX file.
4 If CinePlex Studio is set for LED tracking mode or Reflective Colors tracking
mode, and at least one color is defined, VTViewer plots the real-time location
of each colored LED that has been set up to track.
Note:
If CinePlex Studio is tracking in LED or Reflective Colors mode,
define at least one color to have data appear in VTViewer. If no colors
have been defined, data does not appear at the Plexon MAP.
Version 3.0 95