CinePlex v3 Manual - Plexon Inc

More documents

Recommendations

Info

C.4.2.4 Bracket Attachment Methods Then, choose the most appropriate method of attaching the camera mounting bracket to the desired location. 1 On a surface of a wall or ceiling over 0.4 in (1 cm) thick, use one of the following methods or devise a custom method. a Customer provided screws through the three threaded holes in the bracket into the wall. Wall anchors should be used as necessary. b Customer provided bolts through the three threaded holes in the bracket into a wooden surface. Pilot holes can be drilled, if needed, using the sandwich plate as a template. c Customer provided adhesive or epoxy to glue the surface of the mounting bracket containing the three threaded holes to the surface. 2 On a cage: Version 3.0 C-12
a Place the sandwich plate on the outside of the cage, then b Insert the three small knobs through the sandwich plate holes and through openings in the cage, then c Thread the three small knobs into the threaded holes in the mounting plate. 3 On a wall or surface under 0.4 inches (1 cm) thick: a Drill three 9/32” (7 mm) holes using the sandwich plate as a template, then b Insert the three small knobs through the wall into the threaded holes in the mounting plate. Version 3.0 C-13
Page 1 and 2:
Neurotechnology Research Systems Us
Page 3 and 4:
CinePlex Video, Capture, Tracking,
Page 5 and 6:
Plexon Inc Publication History iii
Page 7 and 8:
Plexon Inc Contents v Publication H
Page 9 and 10:
Plexon Inc CinePlex vii File Toolba
Page 11 and 12:
Plexon Inc CinePlex ix Appendix B P
Page 13 and 14:
Plexon Inc Chapter 1 CinePlex Syste
Page 15 and 16:
— All-digital imaging with one or
Page 17 and 18:
stamped with corresponding MAP time
Page 19 and 20:
Editor features, see “Offline ext
Page 21 and 22:
1.3 CinePlex System Hardware and So
Page 23 and 24:
The Quad MAP Controller (QMC) can c
Page 25 and 26:
1.4 Data Analysis After recording,
Page 27 and 28:
Plexon Inc Chapter 2 Using CinePlex
Page 29 and 30:
2.2 Designing the Experiment The pr
Page 31 and 32:
2.4 Performing an Operational Test
Page 33 and 34:
4 Start Sort Client program and ver
Page 35 and 36:
7 Start CinePlex Studio program. Th
Page 37 and 38:
will not be able to distinguish the
Page 39 and 40:
2.5.4.2.3 LEDs in Light with Reflec
Page 41 and 42:
the object and the yellow rectangle
Page 43 and 44:
2.5.4.3.7 Multicolored Animal. The
Page 45 and 46:
Selecting the Tracking Mode 1 Selec
Page 47 and 48:
3 Check the color to track (by clic
Page 49 and 50:
that sizes, positions and velocitie
Page 51 and 52:
d e Measure its longest dimension i
Page 53 and 54:
In the above image note that the si
Page 55 and 56:
d e Measure the feature’s horizon
Page 57 and 58:
i If the current color in the box n
Page 59 and 60:
n Go to the slider next to the Vert
Page 61 and 62:
6 Repeat these steps for each addit
Page 63 and 64:
Defining Logical Events Logical eve
Page 65 and 66:
1 Click the Add new combination of
Page 67 and 68:
2.6 Executing the Experiment Plan T
Page 69 and 70:
also use a variety of commercial so
Page 71 and 72:
When the Start button is clicked, S
Page 73 and 74:
Note: If Studio is armed on one day
Page 75 and 76:
settings and use the file mode to d
Page 77 and 78:
2 To set or change the folder locat
Page 79 and 80:
3 Open a second Windows Explorer an
Page 81 and 82:
2.7 Global Configuration Pane The G
Page 83 and 84:
2.8 Source Pane The Source Pane def
Page 85 and 86:
The Arena Definition is also used t
Page 87 and 88:
• In Reflective Colors mode, pixe
Page 89 and 90:
Configuring CinePlex Studio to trac
Page 91 and 92:
emove progressively larger features
Page 93 and 94:
The illustration below is taken aft
Page 95 and 96:
Configuring CinePlex Studio to trac
Page 97 and 98:
2 In the Video window a square area
Page 99 and 100:
If Pure Colors is not selected, the
Page 101 and 102:
Increase the threshold to reduce th
Page 103 and 104:
2.10 Operating CinePlex Studio with
Page 105 and 106:
To verify CinePlex Studio data acqu
Page 107 and 108:
3 In the Control View, click Connec
Page 109 and 110:
2.10.1.1 Control View VTViewer disp
Page 111 and 112:
2.10.1.3 VTViewer Options The Optio
Page 113 and 114:
2.11 CinePlex Studio Offline Mode 2
Page 115 and 116:
• Sequences Pane(s) (if behavior
Page 117 and 118:
2.13 CinePlex Studio Test Mode Test
Page 119 and 120:
2.14 Operation with the Quad MAP Co
Page 121 and 122:
6 Connect a push button switch (09-
Page 123 and 124:
Version 3.0 111
Page 125 and 126:
15 On each CPX, launch and arm CPX.
Page 127 and 128:
2.15 Using the Extractor This chapt
Page 129 and 130:
illustrates. Note that the Marker 4
Page 131 and 132:
Plexon Inc Chapter 3 CinePlex Studi
Page 133 and 134:
3.2.1 Static Configuration Pane The
Page 135 and 136:
3.2.1.2.1 Camera Group. The Camera
Page 137 and 138:
• Brightness - this setting speci
Page 139 and 140:
3.2.1.3 Tracking Tabs One of three
Page 141 and 142:
3.2.1.4.1 Object Contour Tracker Gr
Page 143 and 144:
• Object Transparency - This sett
Page 145 and 146:
• Cent. Grav. Size - This setting
Page 147 and 148:
• Mrk1Threshold, Mrk2Threshold, M
Page 149 and 150:
3.2.2 Dynamic Configuration Pane Th
Page 151 and 152:
• Subtract shapes - - this button
Page 153 and 154:
• Add zone to selected sequence -
Page 155 and 156:
• Delete selected tracking event
Page 157 and 158:
3.2.2.4.1 Toolbar. The toolbar cont
Page 159 and 160:
Note: The effects of the Image Qual
Page 161 and 162:
— Name - this value depends on wh
Page 163 and 164:
3.3 Menus The CinePlex Studio File
Page 165 and 166:
3.3.3 DVR Menu 3.3.3.1 Arm Clicking
Page 167 and 168:
3.4 Toolbars The File, DVR and Trac
Page 169 and 170:
ow,time,x1,y1,x2,y2,x3,y3,x4,y4,x5,
Page 171 and 172:
3.6.3 Source Settings The Source se
Page 173 and 174:
Plexon Inc Chapter 4 Using CinePlex
Page 175 and 176:
4.1.3 Changing and Saving Project F
Page 177 and 178:
4.2.2 Setting Up a New Project This
Page 179 and 180:
4.2.3 Understanding the CinePlex Ed
Page 181 and 182:
4.2.4 Defining a New Marker This pr
Page 183 and 184:
Markers window in the Name column a
Page 185 and 186:
3 In the Format area, accept the de
Page 187 and 188:
4.4 Customizing the User Interface
Page 189 and 190:
In the Input window, select an inpu
Page 191 and 192:
matically advances the video by a p
Page 193 and 194:
4.5.3 Editing Markers and Marker Oc
Page 195 and 196:
Selected Marker Occurrence, or clic
Page 197 and 198:
3 Select entries in the Marker 1 an
Page 199 and 200:
is defined and selected. A more sop
Page 201 and 202:
corner of the image. If the video r
Page 203 and 204:
Finding marker occurrences with a b
Page 205 and 206:
2 Choose a marker from the Marker l
Page 207 and 208:
Interpolating missing occurrences 1
Page 209 and 210:
lowing illustration idx indicates t
Page 211 and 212:
6 The user may set the columns for
Page 213 and 214:
4.6 CinePlex Editor How-Tos This se
Page 215 and 216:
However, do not expand the range so
Page 217 and 218:
name and click Export! The Export C
Page 219 and 220:
7 Repeat Step 6 until all the coord
Page 221 and 222:
Plexon Inc Chapter 5 CinePlex Edito
Page 223 and 224:
5.2 Main Window This section descri
Page 225 and 226:
Show Complete Tail feature is usefu
Page 227 and 228:
The color drawn at point p in the t
Page 229 and 230:
— By pressing the PAGE UP or PAGE
Page 231 and 232:
• Automatically Adjust Label Area
Page 233 and 234:
Note: — Type - In the Type area,
Page 235 and 236:
ox and select a different key. When
Page 237 and 238:
Note: By default, if the Show check
Page 239 and 240:
— Data Type: - This item contains
Page 241 and 242:
5.2.8.1 Function The Messages windo
Page 243 and 244:
• Add, Edit, and Delete Marker Oc
Page 245 and 246:
• Reset Automatic Range Adjustmen
Page 247 and 248:
5.3 Menus Menus provide access to C
Page 249 and 250:
— Video Data Input File (AVI) - T
Page 251 and 252:
After verifying that the correct fi
Page 253 and 254:
• Which Markers - The default val
Page 255 and 256:
• File - Type an export file name
Page 257 and 258:
5.3.2 Edit Menu The following illus
Page 259 and 260:
Note: The Edit Marker dialog box ma
Page 261 and 262:
• Marker - This box shows the mar
Page 263 and 264:
5.3.4.7 Step Forward This button ad
Page 265 and 266:
5.3.6 Find Menu The following illus
Page 267 and 268:
• Generate Selected - This button
Page 269 and 270:
• Generate All - This button gene
Page 271 and 272:
— Zone Interval • Operation to
Page 273 and 274:
5.3.7.5 Snap-To Marker Occurrences
Page 275 and 276:
— max - the largest time differen
Page 277 and 278:
5.3.7.8.1 General Tab. • Initial
Page 279 and 280:
5.3.7.8.3 Latency Correction Tab. F
Page 281 and 282:
5.3.7.8.5 Audio Tab. • Available
Page 283 and 284:
— Background - This is the backgr
Page 285 and 286:
5.4 Toolbars CinePlex Editor includ
Page 287 and 288:
5.5 How CinePlex Editor Creates Ini
Page 289 and 290:
then load a neural data file that c
Page 291 and 292:
Marker Type Abbr Information Stored
Page 293 and 294:
From the Marker Occurrences window
Page 295 and 296:
Note that applying this correction
Page 297 and 298:
Snap-To Marker Occurrences tool des
Page 299 and 300:
5.10 Analyzing CinePlex Studio data
Page 301 and 302:
Plexon Inc Appendix A Installation
Page 303 and 304:
Procedure for MAP/CPX Computer Hard
Page 305 and 306:
A.2 Installation - Software This se
Page 307 and 308:
3 The End User License Agreement wi
Page 309 and 310:
7 The Select Program Manager Group
Page 311 and 312: 11 The following window appears twi
Page 313 and 314: 14 Click Next on the window below.
Page 315 and 316: 18 The CinePlex installation has no
Page 317 and 318: 3 The End User License Agreement wi
Page 319 and 320: 7 The Select Program Manager Group
Page 321 and 322: 11 Next, the Sentinel Key Drivers a
Page 323 and 324: 15 Click Finish on the window below
Page 325 and 326: 2 The Welcome window appears. Press
Page 327 and 328: 6 The Select Components window appe
Page 329 and 330: 10 Nothing else will be installed,
Page 331 and 332: 3 After step 6 continue the procedu
Page 333 and 334: Note: to remote upgrades. If a remo
Page 335 and 336: Plexon Inc Appendix B Problem Resol
Page 337 and 338: toggle switch above these connector
Page 339 and 340: the CinePlex software will be requi
Page 341 and 342: 1 Remove the TIM card and check tha
Page 343 and 344: 1 Stop running all unnecessary appl
Page 345 and 346: B.3 CinePlex Studio Messages The ta
Page 347 and 348: Table 1: CinePlex Studio Simple Mes
Page 349 and 350: Table 2: CinePlex Studio Critical M
Page 351 and 352: Plexon Inc Appendix C Lens Selectio
Page 353 and 354: C.2 Lens Selection For CinePlex Ver
Page 355 and 356: C.3 Experiment Design C.3.1 Field o
Page 357 and 358: The formula to calculate the optimu
Page 359 and 360: 3 Three Arm Phenolic Knob (small) -
Page 361: • A local professional camera or
Page 365 and 366: 7 The tripod adaptor should already
Page 367 and 368: Port 1 Port 2 Port 1 Port 2 Port 3
Page 369 and 370: 3 Using the Plexon camera mounting
Page 371 and 372: Plexon Inc Appendix D Plexon User I
Page 373 and 374: D.2 Screen Elements D.2.1 Menus The
Page 375 and 376: D.2.2 Toolbars Each toolbar has a d
Page 377 and 378: • Close Button - The Close button
Page 379 and 380: — Hidden Windows - Docked windows
Page 381 and 382: D.3 Standard Menu Items and Dialogs
Page 383 and 384: D.3.2 Run Menu The purpose of the R
Page 385 and 386: — Licensing - Clicking the Licens
Page 387 and 388: D.3.4 Messages Window The Messages
Page 389 and 390: D.4 Customization Although the menu
Page 391 and 392: • Category - This is a list of al
Page 393 and 394: • Buttons - The toolbar buttons a
Page 395 and 396: Plexon Inc Appendix E Cabling Guide
Page 397 and 398: E.2 Typical MAP/CPX Cabling Diagram
Page 399 and 400: E.3 Typical MAP/CPX System Cabling
Page 401 and 402: E.3.2 MAP/CPX System with Two Video
Page 403 and 404: E.4 MAP/CPX Cable Images Version 3.
Page 405 and 406: E.5.2.2 With CHUB Version 3.0 E-11
Page 407 and 408: E.5.3.2 Two Video Cameras Version 3
Page 409 and 410: * CinePlex, Plexon, and the Plexon
show all

CinePlex v3 Manual - Plexon Inc

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?